Product Type > Assay Kits > ELISA Kits > Other ELISA Kits

SARS-CoV-2 Spike RBD Protein Antibody ELISA Kit (RK04144)

Datasheet

ABclonal:SARS-CoV-2 Spike RBD Protein Antibody ELISA Kit
ABclonal: - SARS-CoV-2 Spike RBD Protein Antibody ELISA Kit (RK04144)
ABclonal:

Overview

Product name SARS-CoV-2 Spike RBD Protein Antibody ELISA Kit
Catalog No. RK04144
Size 96 T
Sample 100 ul
Instrument Microplate Reader
Detection Colorimetric
Assay Time 4 hours
Conjugate Biotin
Assay Type Sandwich ELISA
Sample type serum, plasma, cell culture supernates and other biological fluids
Cross reacts with
Product overview The ELISA (Enzyme-Linked Immunosorbent Assay) kit is an in vitro enzyme-linked immunosorbent assay for the quantitative measurement of samples in cell culture supernatant, serum, plasma (EDTA, citrate, heparin).
Intended use This SARS-CoV-2 Spike RBD Protein Antibody ELISA kit is intended for laboratory research use only and not for use in diagnostic or therapeutic procedures. The stop solution changes color from blue to yellow and the intensity of the color is measured at 450 nm using a spectrophotometer. In order to measure the concentration of SARS-CoV-2 Spike RBD Protein Antibody in the sample, this SARS-CoV-2 Spike RBD Protein Antibody ELISA Kit includes a set of calibration standards. The calibration standards are assayed at the same time as the samples and allow the operator to produce a standard curve of optical density versus SARS-CoV-2 Spike RBD Protein Antibody concentration. The concentration of the samples is then determined by comparing the O.D. of the samples to the standard curve.
Storage instructions Unopened kits can be stored at 2-8°C for 1 year, and opened products must be used within 1 month.
Sensitivity 163.1 pg/ml
Standard curve range 1.56-100 ng/mL
Components Recombinant 2019-nCoV Spike RBD Protein Coated Plate
Control Antibody (1000×)
Concentrated Biotin Recombinant 2019-nCoV Spike RBD Protein (250×)
Streptavidin-HRP Concentrated (100x))
Control/Sample Diluent (R1)
Biotin-Conjugate Protein Diluent (R2)
Streptavidin-HRP Diluent(R3)
Wash Buffer(20x)
TMB Substrate
Stop Solution
Plate Sealers
Specification
Safety notes 1. This kit contains materials with small quantities of sodium azide. Sodium azide reacts with lead and copper plumbing to form explosive metal azides. Upon disposal, flush drains with a large volume of water to prevent azide accumulation. Avoid ingestion and contact with eyes, skin or mucous membranes. In the case of contact, rinse the affected area with plenty of water. Observe all federal, state and local regulations for disposal.
2. All blood components and biological materials should be handled as potentially hazardous. Follow universal precautions as established by the Centers for Disease Control and Prevention and by the Occupational Safety and Health Administration when handling and disposing of infectious agents.

Inquire About This Product

Submit your question about RK04144 below and we will get back to you within one business day.

Alternatively, call us at 888.754.5670.

* For research use only. Not for therapeutic or diagnostic purposes.

!OUT OF STOCK

See Below for Alternatives
Contact us to order